Positioning Your Fire Alarms
Fire Detection System
Your home in Hazelwood, NC, may not be adequately covered by your current fire detection system. Read on to learn about proper fire alarm distribution and other fire safety tips.
1. Rooms and Halls
Because a home fire can begin in any room, the denser your smoke detector coverage, the better. Home inspections standards suggest at least one detector per bedroom. This is especially important for the safety of the occupants, since many fires occur during the night when residents may be sleeping and unaware that there is a problem. Every floor of the home should have at least one detector even if there are no sleeping areas, since this will speed up emergency response and reduce the total amount of fire damage.
2. Working Order
Remember to test each fire alarm in the house every few months. Most models will have a small button that sounds the warning, allowing you to make sure that the speakers are still functional. Depending on the type of detector, a low battery may cause it to blink or make infrequent, short beeps. Some detectors may also require complete replacement after a roughly ten year lifespan has elapsed. If you notice either of these indicators, replace the relevant part as soon as possible. Most batteries and detectors can be obtained for under $20 at your local hardware store.
3. Photoelectric Alarms
A photoelectric fire detection system can provide a little extra warning time to prevent your home from incurring unnecessary smoke damage. These detectors have an internal beam of light whose intensity is changed when smoke scatters the rays. This allows the detector to trigger when smoldering or smoky fires are just beginning, before the home fire becomes a total conflagration.
Remember that no fire alarm is a substitute for adequate fire safety and a solid escape plan. Retain contact information for a professional residential fire restoration service and do not attempt to enter a property that has burned recently.